- USB flash device
- USBTest.zip (includes Memtest, Syslinux and a custom batch file)
Installing Memtest on USB to test for USB Boot compatibility:
The following explains how to install Memtest on a USB device and further run Memtest from USB. Enabling us to test whether a system can boot from USB.
- Download the USBTest.zip and extract the contents of the zip to your flash drive. See Screenshot below:
- Navigate to your flash drive and click makeboot.bat (to make the drive bootable)
- Reboot your computer and set your system BIOS to boot from USB-ZIP or USB-HDD. Or, set the hard disk boot priority to boot from the USB stick if your BIOS lists the device as a hard drive
- Save your BIOS settings.
Upon reboot, you should have a successful launch of Memtest from the USB flash drive:
This test concludes that your system is capable of booting from a USB device using Syslinux and it should be possible to run Linux from USB.
Notes: After booting Memtest from USB, it is not necessary to complete the system memory test. However, if you have the time, it can't hurt to ensure that your computers memory is in good shape.
This test does not guarantee that your computer hardware is supported with a particular Linux distribution. It is possible to pass this test and still have problems booting Linux. For example: A Video Card driver may not be available by default with a particular Linux distribution which could leave you at the shell after boot.